If it happens that you plugged by mistake the Xtractor cable in wrong way while was turned on, the onboard fuses on Xtractor will pop (labeled F1 and F2 on the Xtractor board) causing the Xtractor unit does not powering up or not ejecting the drives. This replacement fuses are same rating as original ones so you can replace it safely. We dont recommend the solder bridge method because in case of any plug mistake the drive or the xtractor could be damaged.

This pack contains 2 identical fuses, but you only need to replace the damaged one. (Check with a multimeter).

To avoid Fuse poping on the future we strongly recommend these 2 simple guidelines:

a) Always turn off xtractor before plug and unplug any cable on it (spear, power cable or dvd drive cable)
b) Double check the cable polarity before plug and dont force the cables

Note: The Fuses are only on Xtractor Versions 1.2 and above